This standard applies to equipment designed and intended to be connected to a TELECOMMUNICATIONS NETWORK termination. It does not apply to equipment covered by EN 60950. It applies regardless of ownership or responsibility for installation or maintenance of the equipment and regardless of the source of power. This standard, in accordance with the principles of safety given in the introduction of EN 60950, covers the requirements and compliance criteria under three headings: 1) Protection of equipment users from hazards in the equipment. The user is considered to be protected from hazards in the equipment if the equipment complies with a relevant safety standard, for example one of those listed in Annex A, but compliance with those standards is not part of this standard. 2) Protection of SERVICE PERSONNEL working on the TELECOMMUNICATION NETWORK and other users of the TELECOMMUNICATION NETWORK, from hazardous conditions on the TELECOMMUNICATION NETWORK resulting from the connection of the equipment. 3) Protection of equipment users from voltages on the TELECOMMUNICATION NETWORK. Requirements additional to those specified in this standard may be necessary for: - equipment intended for operation while exposed, for example, to extremes of temperature; to excessive dust, moisture, or vibration; to flammable gases; to corrosive or explosive atmospheres and - electromedical applications with physical connections to the patient. The requirements for the following items are not covered by this standard: - functional reliability of equipment; - telecommunication facilities with remote supply using EXCESSIVE VOLTAGE; protection of equipment or TELECOMMUNICATION NETWORKS from damage.
Registration number (WIID)
48467
Scope
This standard applies to equipment designed and intended to be connected to a TELECOMMUNICATIONS NETWORK termination. It does not apply to equipment covered by EN 60950. It applies regardless of ownership or responsibility for installation or maintenance of the equipment and regardless of the source of power. This standard, in accordance with the principles of safety given in the introduction of EN 60950, covers the requirements and compliance criteria under three headings: 1) Protection of equipment users from hazards in the equipment. The user is considered to be protected from hazards in the equipment if the equipment complies with a relevant safety standard, for example one of those listed in Annex A, but compliance with those standards is not part of this standard. 2) Protection of SERVICE PERSONNEL working on the TELECOMMUNICATION NETWORK and other users of the TELECOMMUNICATION NETWORK, from hazardous conditions on the TELECOMMUNICATION NETWORK resulting from the connection of the equipment. 3) Protection of equipment users from voltages on the TELECOMMUNICATION NETWORK. Requirements additional to those specified in this standard may be necessary for: - equipment intended for operation while exposed, for example, to extremes of temperature; to excessive dust, moisture, or vibration; to flammable gases; to corrosive or explosive atmospheres and - electromedical applications with physical connections to the patient. The requirements for the following items are not covered by this standard: - functional reliability of equipment; - telecommunication facilities with remote supply using EXCESSIVE VOLTAGE; protection of equipment or TELECOMMUNICATION NETWORKS from damage.
