This amendment refers to changes in 5.2.1 "Feed safety openings", 5.2.2 "Discharge chutes", 5.2.3.1 "Attachment", D.2.3 (9) and new Annex A "Examples of inlet openings where the safety distance is >= 200 mm".
Text of mother standard:
This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. It applies to shredders/chippers with feed intake openings in the form of a single opening or an opening divided into a number of segments. The feed intake openings or segments each being of any shape that will fit into a square of 250 mm - 250 mm measured at the relevant safety distance to the cutting means.
NOTE Feed safety openings are limited to 250 mm - 250 mm but the total feed intake opening can be any size.
This standard describes methods of elimination or reduction of hazards arising from the use of shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard does not cover requirements for:
- units driven by an external power source;
- mobile use of units which can be used in both stationary and mobile modes;
- units with powered discharge intended to broadcast material or load vehicles;
- units with mechanically powered feed intake or attachments;
- units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;
- electrical aspects of electrically
Registration number (WIID)
28209
Scope
This amendment refers to changes in 5.2.1 "Feed safety openings", 5.2.2 "Discharge chutes", 5.2.3.1 "Attachment", D.2.3 (9) and new Annex A "Examples of inlet openings where the safety distance is >= 200 mm".
Text of mother standard:
This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. It applies to shredders/chippers with feed intake openings in the form of a single opening or an opening divided into a number of segments. The feed intake openings or segments each being of any shape that will fit into a square of 250 mm - 250 mm measured at the relevant safety distance to the cutting means.
NOTE Feed safety openings are limited to 250 mm - 250 mm but the total feed intake opening can be any size.
This standard describes methods of elimination or reduction of hazards arising from the use of shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard does not cover requirements for:
- units driven by an external power source;
- mobile use of units which can be used in both stationary and mobile modes;
- units with powered discharge intended to broadcast material or load vehicles;
- units with mechanically powered feed intake or attachments;
- units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;
- electrical aspects of electrically
