EN 1999-1-1 gives basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys (see Clause 5 and Annex C).
This document does not cover the following, unless otherwise explicitly stated in this document:
— members with material thickness less than 0,6 mm;
— welded members with material thickness less than 1,5 mm;
— connections with:
— steel bolts and pins with diameter less than 5 mm;
— aluminium bolts and pins with diameter less than 8 mm;
— rivets and thread forming screws with diameter less than 3,9 mm.
Registration number (WIID)
82405
Scope
EN 1999-1-1 gives basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys (see Clause 5 and Annex C).
This document does not cover the following, unless otherwise explicitly stated in this document:
— members with material thickness less than 0,6 mm;
— welded members with material thickness less than 1,5 mm;
— connections with:
— steel bolts and pins with diameter less than 5 mm;
— aluminium bolts and pins with diameter less than 8 mm;
— rivets and thread forming screws with diameter less than 3,9 mm.
