Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This Technical Report describes how screw conveyors and product receivers can be used as an explosion isolation system for dust explosions using the product handled by this equipment as a means for explosion isolation. The report specifies test methods for evaluating the efficacy of these isolation techniques depending on both the mechanical layout of the equipment itself and the properties of the product handled.
It covers e.g.:
a) an overview of information available from research performed and experience obtained in industry
b) important factors affecting the efficiency of such techniques of explosion isolation
c) proposed ways of testing for evaluating the efficacy of these isolation techniques
d) installation instructions including monitoring equipment
e) maintenance instructions.
The report only covers the use of screw conveyors and product receivers as a means of explosion isolation system for avoiding explosion propagation between interconnected enclosures in which an explosion may result as a consequence of ignition of explosive dust-air mixtures.
This standard is not applicable for explosions of materials listed below, or for mixtures containing some of those materials:
a) unstable materials that are liable to dissociate;
b) explosive materials;
c) pyrotechnic materials.
For other explosion isolation systems and devices reference is made to EN 15089, EN-ISO 16852 (flame arresters), EN 16020 (explosion diverters)
Reģistrācijas numurs (WIID)
36055
Darbības sfēra
This Technical Report describes how screw conveyors and product receivers can be used as an explosion isolation system for dust explosions using the product handled by this equipment as a means for explosion isolation. The report specifies test methods for evaluating the efficacy of these isolation techniques depending on both the mechanical layout of the equipment itself and the properties of the product handled.
It covers e.g.:
a) an overview of information available from research performed and experience obtained in industry
b) important factors affecting the efficiency of such techniques of explosion isolation
c) proposed ways of testing for evaluating the efficacy of these isolation techniques
d) installation instructions including monitoring equipment
e) maintenance instructions.
The report only covers the use of screw conveyors and product receivers as a means of explosion isolation system for avoiding explosion propagation between interconnected enclosures in which an explosion may result as a consequence of ignition of explosive dust-air mixtures.
This standard is not applicable for explosions of materials listed below, or for mixtures containing some of those materials:
a) unstable materials that are liable to dissociate;
b) explosive materials;
c) pyrotechnic materials.
For other explosion isolation systems and devices reference is made to EN 15089, EN-ISO 16852 (flame arresters), EN 16020 (explosion diverters)
