Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This standard specifies a method of testing a small insulated wire under fire conditions when the method specified in IEC Publication 332-1 is not suitable because some small conductors may melt during the application of the flame - The range of application recommended is for solid copper conductors from 0.4 mm to 0.8 mm diameter and for stranded conductors from 0.1 mm2 to 0.5 mm 2 cross-section - This standard includes the requirement for compliance - Note: The use of insulated wire which complies with this standard is not sufficient to prevent flame propagation under all conditions of installation - When the risk of propagation is high, such as with long vertical runs of bunches of wires, it cannot be assumed that, because a sample complies with this standard, the bunch will behave in a similar manner
Reģistrācijas numurs (WIID)
53127
Darbības sfēra
This standard specifies a method of testing a small insulated wire under fire conditions when the method specified in IEC Publication 332-1 is not suitable because some small conductors may melt during the application of the flame - The range of application recommended is for solid copper conductors from 0.4 mm to 0.8 mm diameter and for stranded conductors from 0.1 mm2 to 0.5 mm 2 cross-section - This standard includes the requirement for compliance - Note: The use of insulated wire which complies with this standard is not sufficient to prevent flame propagation under all conditions of installation - When the risk of propagation is high, such as with long vertical runs of bunches of wires, it cannot be assumed that, because a sample complies with this standard, the bunch will behave in a similar manner
