Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This standard specifies a method of test on a single vertical insulated wire or cable and the requirement for compliance. Notes 1. - Since the use of insulated wire or cable that complies with the requirement is not sufficient by itself to prevent propagation of fire undler all conditidons of installation, it is recommended that wherever the risk of propagation is high, for example in long vertical runs dof bunches of cables, special installation precautions should also be taken. It cannot be assumed that because the sample of cable complies with the performance required in this standard that a bunch of cables will behave in a similar manner. 2. - The method specified is not suitable for the testing of some small wires due to the melting of the conductors during the time of application of the flame.
Reģistrācijas numurs (WIID)
43526
Darbības sfēra
This standard specifies a method of test on a single vertical insulated wire or cable and the requirement for compliance. Notes 1. - Since the use of insulated wire or cable that complies with the requirement is not sufficient by itself to prevent propagation of fire undler all conditidons of installation, it is recommended that wherever the risk of propagation is high, for example in long vertical runs dof bunches of cables, special installation precautions should also be taken. It cannot be assumed that because the sample of cable complies with the performance required in this standard that a bunch of cables will behave in a similar manner. 2. - The method specified is not suitable for the testing of some small wires due to the melting of the conductors during the time of application of the flame.
