Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
<p>This document specifies tests and requirements for the gas temperature sensor, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This document is not applicable to the following:</p>
<p>a) fuel containers;</p>
<p>b) stationary gas engines;</p>
<p>c) container mounting hardware;</p>
<p>d) electronic fuel management;</p>
<p>e) refuelling receptacles.</p>
<p>It is recognized that miscellaneous components not specifically covered herein can be examined to meet the criteria of this document and tested according to the appropriate functional tests.</p>
<p>All references to pressure in this document are to be considered gauge pressures unless otherwise specified.</p>
<p>This document is based upon a working pressure for natural gas as a fuel of 1,6 MPa [16 bar<sup>1</sup>]. Other working pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio). For example, a 2 MPa (20 bar) working pressure system will require pressures to be multiplied by 1,25.</p>
<p> </p>
<p><sup>1</sup> 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm<sup>2</sup>.</p>
Reģistrācijas numurs (WIID)
77674
Darbības sfēra
<p>This document specifies tests and requirements for the gas temperature sensor, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This document is not applicable to the following:</p>
<p>a) fuel containers;</p>
<p>b) stationary gas engines;</p>
<p>c) container mounting hardware;</p>
<p>d) electronic fuel management;</p>
<p>e) refuelling receptacles.</p>
<p>It is recognized that miscellaneous components not specifically covered herein can be examined to meet the criteria of this document and tested according to the appropriate functional tests.</p>
<p>All references to pressure in this document are to be considered gauge pressures unless otherwise specified.</p>
<p>This document is based upon a working pressure for natural gas as a fuel of 1,6 MPa [16 bar<sup>1</sup>]. Other working pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio). For example, a 2 MPa (20 bar) working pressure system will require pressures to be multiplied by 1,25.</p>
<p> </p>
<p><sup>1</sup> 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm<sup>2</sup>.</p>
