Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
Procedures enabling to take into account the effect of adaptive building envelope elements in the
calculation of the energy needs for heating, cooling, internal temperatures and sensible and latent heat
loads for buildings.
ISO 52016-1:2017 contains a normative Annex G that provides already a framework for such
calculation procedures. The aim of this new proposed standard is to work out calculation procedures
instead of only a framework for the calculation.
Adaptive building envelope elements are (usually: transparent) elements in the building envelope with
thermal and/or solar and/or visual properties that vary in time, either passively or due to an active
control.
The aim of adaptive building envelope elements is to improve the energy performance and/or comfort
in the building under varying outdoor conditions (weather, season), indoor conditions (e.g. internal heat
gains) and user needs.
Examples of adaptive building envelopes are products or assemblies with one or more of the following
features:
• movable blinds,
• controllable vents,
• switchable glazing,
• movable thermally insulating shutters,
• PV integrated glazing (leading to variable total (thermal) solar energy transmittance),
• double skin facades.
The input data for the calculation are the thermal, solar and visual properties of the building element for
the different states (e.g. from open to closed, from dark to light and combinations of these); and in case
of gradually varying properties: for a number of representative discrete states.
In order to be able to use these properties for energy and internal temperature calculations, the details
of the (passive or active) control protocol are needed as input as well.
The thermal, solar and visual properties of the building element are the thermal transmittance (Uvalue),
air permeability (L-value) and solar transmittance (g-value). Or, where needed, the properties
per component: e.g. thermal resistances and air permeability per component, solar absorptance and
solar and visual transmittance per component. It is assumed that the existing standards on glazing
(ISO/TC 160/SC 2, CEN/TC 129) and on building elements (especially the EPB standards recently
revised under ISO/TC 163/SC 2 and CEN/TC 89) enable to obtain these input data in most cases.
No ready-to-use international standards exist for the assumptions on the control protocol. EN 15232-1
(and ISO 52120-1 in preparation) provides some guidance.
The output of this standard should also be usable to compare products and assemblies. Due to the
interactive nature of adaptive building envelope elements, this may require the use of specific reference
buildings and occupant patterns (similar as for current international standards on energy performance
rating of glazings and windows).
Reģistrācijas numurs (WIID)
67613
Darbības sfēra
Procedures enabling to take into account the effect of adaptive building envelope elements in the
calculation of the energy needs for heating, cooling, internal temperatures and sensible and latent heat
loads for buildings.
ISO 52016-1:2017 contains a normative Annex G that provides already a framework for such
calculation procedures. The aim of this new proposed standard is to work out calculation procedures
instead of only a framework for the calculation.
Adaptive building envelope elements are (usually: transparent) elements in the building envelope with
thermal and/or solar and/or visual properties that vary in time, either passively or due to an active
control.
The aim of adaptive building envelope elements is to improve the energy performance and/or comfort
in the building under varying outdoor conditions (weather, season), indoor conditions (e.g. internal heat
gains) and user needs.
Examples of adaptive building envelopes are products or assemblies with one or more of the following
features:
• movable blinds,
• controllable vents,
• switchable glazing,
• movable thermally insulating shutters,
• PV integrated glazing (leading to variable total (thermal) solar energy transmittance),
• double skin facades.
The input data for the calculation are the thermal, solar and visual properties of the building element for
the different states (e.g. from open to closed, from dark to light and combinations of these); and in case
of gradually varying properties: for a number of representative discrete states.
In order to be able to use these properties for energy and internal temperature calculations, the details
of the (passive or active) control protocol are needed as input as well.
The thermal, solar and visual properties of the building element are the thermal transmittance (Uvalue),
air permeability (L-value) and solar transmittance (g-value). Or, where needed, the properties
per component: e.g. thermal resistances and air permeability per component, solar absorptance and
solar and visual transmittance per component. It is assumed that the existing standards on glazing
(ISO/TC 160/SC 2, CEN/TC 129) and on building elements (especially the EPB standards recently
revised under ISO/TC 163/SC 2 and CEN/TC 89) enable to obtain these input data in most cases.
No ready-to-use international standards exist for the assumptions on the control protocol. EN 15232-1
(and ISO 52120-1 in preparation) provides some guidance.
The output of this standard should also be usable to compare products and assemblies. Due to the
interactive nature of adaptive building envelope elements, this may require the use of specific reference
buildings and occupant patterns (similar as for current international standards on energy performance
rating of glazings and windows).
