Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This document specifies the procedures for determining the flow time using an inverted cone.
NOTE 1 This test was originally developed for tremie concrete. This test can generally be suitable for concretes with a slump test value (measured according to EN 12350-2) higher than 150 mm, or concrete with a flow table test value (measured according to EN 12350-5) higher than 450 mm.
This test doesn’t apply to self-compacting concrete.
NOTE 2 Self-compacting flow time can be measure using EN 12350-9.
This test is not suitable when the maximum size of the coarse aggregate (Dmax) exceeds 22,4 mm.
Reģistrācijas numurs (WIID)
82531
Darbības sfēra
This document specifies the procedures for determining the flow time using an inverted cone.
NOTE 1 This test was originally developed for tremie concrete. This test can generally be suitable for concretes with a slump test value (measured according to EN 12350-2) higher than 150 mm, or concrete with a flow table test value (measured according to EN 12350-5) higher than 450 mm.
This test doesn’t apply to self-compacting concrete.
NOTE 2 Self-compacting flow time can be measure using EN 12350-9.
This test is not suitable when the maximum size of the coarse aggregate (Dmax) exceeds 22,4 mm.
