Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This standard is valid for dimensions, design and material of clamp connections for butt-welding, the
long version (stub form KL) is intended for orbital welding.
The clamp connections are designed for the following admissible pressure ratings:
Outside tube diameter from 6.35 mm up to 42.4 mm: 2.5 MPa (25 bar);
Outside tube diameter from 48.3 mm up to 76.2 mm: 1.6 MPa (16 bar);
Outside tube diameter from 85.0 mm up to 219.1 mm: 1.0 MPa (10 bar).
The admissible pressure ratings are configured for a temperature range of –10°C to +140°C using
appropriate clamps and gasket compounds.
Reģistrācijas numurs (WIID)
40577
Darbības sfēra
This standard is valid for dimensions, design and material of clamp connections for butt-welding, the
long version (stub form KL) is intended for orbital welding.
The clamp connections are designed for the following admissible pressure ratings:
Outside tube diameter from 6.35 mm up to 42.4 mm: 2.5 MPa (25 bar);
Outside tube diameter from 48.3 mm up to 76.2 mm: 1.6 MPa (16 bar);
Outside tube diameter from 85.0 mm up to 219.1 mm: 1.0 MPa (10 bar).
The admissible pressure ratings are configured for a temperature range of –10°C to +140°C using
appropriate clamps and gasket compounds.
