Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range.
Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only.
ISO 898-5:2012 is applicable to set screws and similar fasteners:
made of carbon steel or alloy steel,
having a triangular ISO metric screw thread according to ISO 68-1,
with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2,
with diameter/pitch combinations according to ISO 261 and ISO 262, and
having thread tolerances according to ISO 965-1 and ISO 965-2.
Reģistrācijas numurs (WIID)
33108
Darbības sfēra
ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range.
Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only.
ISO 898-5:2012 is applicable to set screws and similar fasteners:
made of carbon steel or alloy steel,
having a triangular ISO metric screw thread according to ISO 68-1,
with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2,
with diameter/pitch combinations according to ISO 261 and ISO 262, and
having thread tolerances according to ISO 965-1 and ISO 965-2.
