CEN/CLC/TC 5
| Projekta Nr. | LVS EN 16602-70-17:2020 |
|---|---|
| Nosaukums | This standard covers primarily two key types of coating: • Coatings on optical components (e.g. AR/HR coatings, interference filters, wavelength selective coatings) • Thermal control and thermo-optical coatings (e.g. paints, chemical conversion coatings, coatings applied by physical deposition processes) Other miscellaneous coatings will also be considered by the working group for inclusion, and they will be assessed on case by case basis e.g: • Protective coatings (e.g. ATOX protection coating on MLI) • Conductive coatings for ESD control • Coatings for abrasion resistance (e.g hard coatings on bearings) The standard includes coatings and surface finishes to be used during in-orbit and on-ground phases. It will be limited to environmental durability test requirements and it will not cover specific functional performance requirements (although of course functional performance needs to be verified as part of the environmental qualification). NOTE: Existing standards (ECSS or otherwise) for related aspects will be referenced where necessary (e.g. adhesion testing, laser induced damage testing, testing of cover glass coatings etc.). |
| Reģistrācijas numurs (WIID) | 63847 |
| Darbības sfēra | This standard covers primarily two key types of coating: • Coatings on optical components (e.g. AR/HR coatings, interference filters, wavelength selective coatings) • Thermal control and thermo-optical coatings (e.g. paints, chemical conversion coatings, coatings applied by physical deposition processes) Other miscellaneous coatings will also be considered by the working group for inclusion, and they will be assessed on case by case basis e.g: • Protective coatings (e.g. ATOX protection coating on MLI) • Conductive coatings for ESD control • Coatings for abrasion resistance (e.g hard coatings on bearings) The standard includes coatings and surface finishes to be used during in-orbit and on-ground phases. It will be limited to environmental durability test requirements and it will not cover specific functional performance requirements (although of course functional performance needs to be verified as part of the environmental qualification). NOTE: Existing standards (ECSS or otherwise) for related aspects will be referenced where necessary (e.g. adhesion testing, laser induced damage testing, testing of cover glass coatings etc.). |
| Statuss | Standarts spēkā |
| ICS grupa | 49.140 49.040 |