Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This standard is Part 2 of a three part series of standards defining the technical requirements for water monitoring equipment. This standard defines the performance requirements and conformity test procedures for on-line analysers. On-line analysers are equipment that are permanently installed and capable of making continuous real-time measurements in water of chemicals or physical parameters.
On-line analysers are used extensively in the industrial process and water industries, and by regulators for compliance and surveillance monitoring and process control purposes. Thje standard supports the Integrated Pollution Prevention and Control Directive, and the Water Framework Directive.
Performance requirements and conformity test procedures cover analysers that can measure the following determinands in water: Ammonia; COD; conductivity; dissolved oxygen; free cyanide; nitrates; orthophosphate; pH; temperature; TOC; total arsenic; total cadmium; total chlorine; total copper; total lead; total mercury; total nickel; total oxidised nitrogen; total phosphorus; turbidity
Reģistrācijas numurs (WIID)
36843
Darbības sfēra
This standard is Part 2 of a three part series of standards defining the technical requirements for water monitoring equipment. This standard defines the performance requirements and conformity test procedures for on-line analysers. On-line analysers are equipment that are permanently installed and capable of making continuous real-time measurements in water of chemicals or physical parameters.
On-line analysers are used extensively in the industrial process and water industries, and by regulators for compliance and surveillance monitoring and process control purposes. Thje standard supports the Integrated Pollution Prevention and Control Directive, and the Water Framework Directive.
Performance requirements and conformity test procedures cover analysers that can measure the following determinands in water: Ammonia; COD; conductivity; dissolved oxygen; free cyanide; nitrates; orthophosphate; pH; temperature; TOC; total arsenic; total cadmium; total chlorine; total copper; total lead; total mercury; total nickel; total oxidised nitrogen; total phosphorus; turbidity
