Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This dcoument specifies a method for the determination of fluoro-, chloro-, bromo- and iodo-organic compounds (AOF, AOCl, AOBr, AOI). Due to the high solubility of AgF in water the scope of ISO 9562 is restricted to Cl-, Br- and I-organic compounds (AOX, calculated as chlorine) because of the applied argentometric detection. The PN follows the proven AOX ISO 9562 method: adsorption of organohalogen
compounds on activated carbon, oxidative combustion at 1000 °C with following alterations: constant water feed during combustion (hydropyrolysis), absorption of combustion gases in water, halide specific detection using ionchromatography. The method is applicable for the determination of
2 µg/l AOF, expressed as F
10 µg/l AOCl, expressed as Cl
1 µg/l AOBr, expressed as Br
1 µg/l AOI, expressed as I.
Samples for determination of AOF are treated differently than samples for the determination of AOCl,
AOBr and AOI.
- Samples for determination of AOF are not acidified. The adsorption takes place under unchanged pH
conditions. Washing is also performed with a neutral washing solution.
- Samples for the determination of AOCl, AOBr and AOI are adjusted to a pH value 2 with nitric acid,
the adsorption and washing take place in a nitric acid environment.
Reģistrācijas numurs (WIID)
77976
Darbības sfēra
This dcoument specifies a method for the determination of fluoro-, chloro-, bromo- and iodo-organic compounds (AOF, AOCl, AOBr, AOI). Due to the high solubility of AgF in water the scope of ISO 9562 is restricted to Cl-, Br- and I-organic compounds (AOX, calculated as chlorine) because of the applied argentometric detection. The PN follows the proven AOX ISO 9562 method: adsorption of organohalogen
compounds on activated carbon, oxidative combustion at 1000 °C with following alterations: constant water feed during combustion (hydropyrolysis), absorption of combustion gases in water, halide specific detection using ionchromatography. The method is applicable for the determination of
2 µg/l AOF, expressed as F
10 µg/l AOCl, expressed as Cl
1 µg/l AOBr, expressed as Br
1 µg/l AOI, expressed as I.
Samples for determination of AOF are treated differently than samples for the determination of AOCl,
AOBr and AOI.
- Samples for determination of AOF are not acidified. The adsorption takes place under unchanged pH
conditions. Washing is also performed with a neutral washing solution.
- Samples for the determination of AOCl, AOBr and AOI are adjusted to a pH value 2 with nitric acid,
the adsorption and washing take place in a nitric acid environment.
