Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
EN 1999-1-1 gives basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys (see Clause 5 and Annex C).
This document does not cover the following, unless otherwise explicitly stated in this document:
— members with material thickness less than 0,6 mm;
— welded members with material thickness less than 1,5 mm;
— connections with:
— steel bolts and pins with diameter less than 5 mm;
— aluminium bolts and pins with diameter less than 8 mm;
— rivets and thread forming screws with diameter less than 3,9 mm.
Reģistrācijas numurs (WIID)
82405
Darbības sfēra
EN 1999-1-1 gives basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys (see Clause 5 and Annex C).
This document does not cover the following, unless otherwise explicitly stated in this document:
— members with material thickness less than 0,6 mm;
— welded members with material thickness less than 1,5 mm;
— connections with:
— steel bolts and pins with diameter less than 5 mm;
— aluminium bolts and pins with diameter less than 8 mm;
— rivets and thread forming screws with diameter less than 3,9 mm.
