Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This Technical Specification specifies a procedure to use an Alternative Method (AM) for measuring the concentration of sulphur dioxide (SO2) emitted to the atmosphere from industrial stacks and flues. Test laboratories may use this AM instead of the Standard Reference Method (SRM) for SO2, EN 14791. This Technical Specification describes instrumental techniques, including the sampling system and sample gas conditioning system, together with an accompanying method, to determine SO2 in stack and flue gases. The AM described in this standard can be used for periodic monitoring, and for calibrating and verifying Continuous Emission Monitoring Systems (CEMs) permanently installed on a stack, for regulatory or other purposes. When used as a reference method, the test laboratory needs to show that the instrumental systems used within the method meet the performance standards for CEMs in EN 15267-3 at least, and that overall uncertainty of the method is less than the uncertainty budgets specified in applicable EC Directives. This Technical Specification has been developed for compliance assessment monitoring, as well as calibration and verification work, under applicable standards and EC Directives. These include EN 14181 for the quality assurance of CEMs, and regulatory monitoring required by EC Directives for waste incineration, large combustion plant, and integrated pollution prevention and control, for example, Directive 2000/76/EC on the incineration of waste and Directive 2001/80/EC on the limitation of emissions of certain pollutants into the air from large combustion plants. The limit value of EU Directives are expressed in mg.m-3 on dry basis and at the reference conditions of 273 K and 101,3 kPa.
Reģistrācijas numurs (WIID)
37089
Darbības sfēra
This Technical Specification specifies a procedure to use an Alternative Method (AM) for measuring the concentration of sulphur dioxide (SO2) emitted to the atmosphere from industrial stacks and flues. Test laboratories may use this AM instead of the Standard Reference Method (SRM) for SO2, EN 14791. This Technical Specification describes instrumental techniques, including the sampling system and sample gas conditioning system, together with an accompanying method, to determine SO2 in stack and flue gases. The AM described in this standard can be used for periodic monitoring, and for calibrating and verifying Continuous Emission Monitoring Systems (CEMs) permanently installed on a stack, for regulatory or other purposes. When used as a reference method, the test laboratory needs to show that the instrumental systems used within the method meet the performance standards for CEMs in EN 15267-3 at least, and that overall uncertainty of the method is less than the uncertainty budgets specified in applicable EC Directives. This Technical Specification has been developed for compliance assessment monitoring, as well as calibration and verification work, under applicable standards and EC Directives. These include EN 14181 for the quality assurance of CEMs, and regulatory monitoring required by EC Directives for waste incineration, large combustion plant, and integrated pollution prevention and control, for example, Directive 2000/76/EC on the incineration of waste and Directive 2001/80/EC on the limitation of emissions of certain pollutants into the air from large combustion plants. The limit value of EU Directives are expressed in mg.m-3 on dry basis and at the reference conditions of 273 K and 101,3 kPa.
