CEN/TC 301

Projekta Nr.LVS EN ISO 15118-4:2019
NosaukumsThis standard specifies test cases to be applied to and correctly handled by EVs (EVCC) and EVSEs (SECC) implementing ISO 15118-2. The system under test will comprise: (A) A simulated SECC to verify the correct behaviour of a real EVCC (B) A simulated EVCC to verify the correct behaviour of a real SECC The test documents will specify test cases for all requirements defined in ISO 15118-2 and ISO 15118-3 verifying e.g. the following aspects: 1. Correct handling of basic signalling (as defined in ISO 15118-3) and states as basis for high level communication incl. various trigger conditions after plug-in process. 2. Initialization of communication and charge spot discovery. 3. Connection establishment, interruption and reestablishment. 4. Proper implementation of security measures defined in ISO 15118-2. 5. Proper implementation of the individual profiles and use-cases described in ISO 15118-1 (e.g. load levelling, plug & charge payment, authentication, etc.). The test cases will cover positive tests (defined according to ISO 15118-2 and ISO 15118-3). Also, error scenarios (e.g., incorrectly formatted requests, invalid content of messages, disconnect during communication, power outage and restart, security tests) as well as tests for timing behaviour shall be defined which also have to be handled by EVCC and SECC to ensure interoperability of EVSEs and EVs. The test cases will be structured according to the OSI layer (1…7) whereas it has to be determined during the creation of the test specification whether certain OSI layers will be tested from a functional perspective (e.g., PHY, IPv6, TCP, …), or not tested at all (if these are well known protocols). The specific contents of ISO 15118-2 will be tested thoroughly. The test cases will include standard test case attributes like pre-conditions, test steps, expected results to evaluate a pass or a fail and post-conditions to be applied to return the system under test to a safe state.
Reģistrācijas numurs (WIID)66345
Darbības sfēraThis standard specifies test cases to be applied to and correctly handled by EVs (EVCC) and EVSEs (SECC) implementing ISO 15118-2. The system under test will comprise: (A) A simulated SECC to verify the correct behaviour of a real EVCC (B) A simulated EVCC to verify the correct behaviour of a real SECC The test documents will specify test cases for all requirements defined in ISO 15118-2 and ISO 15118-3 verifying e.g. the following aspects: 1. Correct handling of basic signalling (as defined in ISO 15118-3) and states as basis for high level communication incl. various trigger conditions after plug-in process. 2. Initialization of communication and charge spot discovery. 3. Connection establishment, interruption and reestablishment. 4. Proper implementation of security measures defined in ISO 15118-2. 5. Proper implementation of the individual profiles and use-cases described in ISO 15118-1 (e.g. load levelling, plug & charge payment, authentication, etc.). The test cases will cover positive tests (defined according to ISO 15118-2 and ISO 15118-3). Also, error scenarios (e.g., incorrectly formatted requests, invalid content of messages, disconnect during communication, power outage and restart, security tests) as well as tests for timing behaviour shall be defined which also have to be handled by EVCC and SECC to ensure interoperability of EVSEs and EVs. The test cases will be structured according to the OSI layer (1…7) whereas it has to be determined during the creation of the test specification whether certain OSI layers will be tested from a functional perspective (e.g., PHY, IPv6, TCP, …), or not tested at all (if these are well known protocols). The specific contents of ISO 15118-2 will be tested thoroughly. The test cases will include standard test case attributes like pre-conditions, test steps, expected results to evaluate a pass or a fail and post-conditions to be applied to return the system under test to a safe state.
StatussStandarts spēkā
ICS grupa43.120
43.040.15