Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
8. Scope
This European Standard defines the health and safety requirements of strip processing lines.
This European Standard deals with significant hazards, hazardous situations and events relevant for strip processing line machinery and equipment, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable faults and malfunctions in case of misuse.
This European Standard applies to:
Strip processing lines for treating metal strip: from coil take-over-point of the entry section through the process up to the coil take-over-point of the exit section or interface to other lines (terminal equipment).
NOTE 1 The aforementioned lines/ processes can also occur in combination.
NOTE 2 If the aforementioned lines/processes are combined with processes which are not covered by the scope of this standard, it is recommended to use this standard as a guideline.
NOTE 3 Thermo process equipment integrated in strip processing lines is covered by EN 746 series. For dryers and ovens, in which flammable substances are released, EN 1539 applies.
This European Standard does not cover:
Thermo process equipment, e. g., in accordance with EN 746 series;
Dryers and ovens in accordance with EN 1539;
Coil transporting system before coil take-over-point at the entry section and after coil take-over-point at the exit section, e. g., hook conveyors, overhead cranes, fork lift and railway trucks and other vehicles;
Acid regeneration plants;
Regeneration plants which are not integral part of the strip processing line
Storage equipment for coils;
Rolling mill stands (i. e., skin pass and reduction stands) according to EN 15094;
Rollshop equipment;
Separate process technology (e. g., compressed air system, treatment of water and treatment of rolling lubricant);
Separate cleaning system for exhaust air;
Firefighting system.
NOTE: Protection of persons in case of using asphyxiant gases used in firefighting system is covered by this document, see Annex C.
This European Standard is not applicable to strip processing line machinery and equipment, which are manufactured before the date of publication of this standard by CEN.
NOTE: In case of revamping parts of a strip processing line, this European Standard should be used as a guideline for the parts to be revamped
Reģistrācijas numurs (WIID)
68961
Darbības sfēra
8. Scope
This European Standard defines the health and safety requirements of strip processing lines.
This European Standard deals with significant hazards, hazardous situations and events relevant for strip processing line machinery and equipment, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable faults and malfunctions in case of misuse.
This European Standard applies to:
Strip processing lines for treating metal strip: from coil take-over-point of the entry section through the process up to the coil take-over-point of the exit section or interface to other lines (terminal equipment).
NOTE 1 The aforementioned lines/ processes can also occur in combination.
NOTE 2 If the aforementioned lines/processes are combined with processes which are not covered by the scope of this standard, it is recommended to use this standard as a guideline.
NOTE 3 Thermo process equipment integrated in strip processing lines is covered by EN 746 series. For dryers and ovens, in which flammable substances are released, EN 1539 applies.
This European Standard does not cover:
Thermo process equipment, e. g., in accordance with EN 746 series;
Dryers and ovens in accordance with EN 1539;
Coil transporting system before coil take-over-point at the entry section and after coil take-over-point at the exit section, e. g., hook conveyors, overhead cranes, fork lift and railway trucks and other vehicles;
Acid regeneration plants;
Regeneration plants which are not integral part of the strip processing line
Storage equipment for coils;
Rolling mill stands (i. e., skin pass and reduction stands) according to EN 15094;
Rollshop equipment;
Separate process technology (e. g., compressed air system, treatment of water and treatment of rolling lubricant);
Separate cleaning system for exhaust air;
Firefighting system.
NOTE: Protection of persons in case of using asphyxiant gases used in firefighting system is covered by this document, see Annex C.
This European Standard is not applicable to strip processing line machinery and equipment, which are manufactured before the date of publication of this standard by CEN.
NOTE: In case of revamping parts of a strip processing line, this European Standard should be used as a guideline for the parts to be revamped
