Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
<p>This part of ISO 5019 specifies the dimensions of basic refractory bricks for use in oxygen steel-making converters. It provides for twelve thicknesses of lining, rising from a minimum of 25 mm to a maximum of 800 mm in steps of 50 mm. For information, the calculated volume of each size of brick is shown in a table, and also the internal diameter of lining for which each size is suitable, if used alone. These diameter have been calculated with no allowance for joint thicknesses.</p>
Reģistrācijas numurs (WIID)
11042
Darbības sfēra
<p>This part of ISO 5019 specifies the dimensions of basic refractory bricks for use in oxygen steel-making converters. It provides for twelve thicknesses of lining, rising from a minimum of 25 mm to a maximum of 800 mm in steps of 50 mm. For information, the calculated volume of each size of brick is shown in a table, and also the internal diameter of lining for which each size is suitable, if used alone. These diameter have been calculated with no allowance for joint thicknesses.</p>
