Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
<p>This document specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching with a scratch stylus loaded with a specified load. Penetration of the stylus is to the substrate, except in the case of a multi-coat system, in which case the stylus can penetrate either to the substrate or to an intermediate coat.</p>
<p>The method specified can be carried out</p>
<p>a) either as a "pass/fail" test, by testing with a single specified load applied to the stylus to assess conformity with a particular specification, or</p>
<p>b) as an assessment test by applying increasing loads to the stylus to determine the minimum load at which the coating is penetrated.</p>
<p>NOTE Neither this document nor ISO 1518‑2 specifies a method using a curved stylus, which is specified in ISO 12137. The choice between the three methods will depend on the particular practical problem.</p>
Reģistrācijas numurs (WIID)
73853
Darbības sfēra
<p>This document specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching with a scratch stylus loaded with a specified load. Penetration of the stylus is to the substrate, except in the case of a multi-coat system, in which case the stylus can penetrate either to the substrate or to an intermediate coat.</p>
<p>The method specified can be carried out</p>
<p>a) either as a "pass/fail" test, by testing with a single specified load applied to the stylus to assess conformity with a particular specification, or</p>
<p>b) as an assessment test by applying increasing loads to the stylus to determine the minimum load at which the coating is penetrated.</p>
<p>NOTE Neither this document nor ISO 1518‑2 specifies a method using a curved stylus, which is specified in ISO 12137. The choice between the three methods will depend on the particular practical problem.</p>
