ISO/TC 39/SC 4/WG 1

Projekta Nr.ISO 19085-8:2024
Nosaukums<p class="MsoBodyText"><span lang="EN-GB">This document specifies the safety requirements and measures for wide belt sanding machines (defined in 3.1) and for surface treating machines (defined in 3.2) capable of continuous production use, altogether referred to as “machines”.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases are also taken into account.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">transversal sanding unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">cleaning brushing unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">satining roller unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">disk brushing unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">texturing brushing roller unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">texturing brushing belt unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">cutterblock unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">texturing band saw unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">spiked roller unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">multi blade unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">conveyor directly controlled by the machine;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">additional workpiece vacuum clamping device;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">antistatic bar unit.</span></p> <p class="Note"><span lang="EN-GB">NOTE 1<span style="mso-tab-count: 1;">        </span>An antistatic bar is a device that eliminates electrostatic charges on the workpiece to ease its subsequent cleaning from dust by airflow.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document is also applicable to machines fitted with a laser engraving unit, but the specific hazards of this unit have not been dealt with.</span></p> <p class="MsoBodyText"><span lang="EN-GB">The machines are designed to process workpieces with flat surface and even thickness, in shape of panels or beams or frames, consisting of:</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">a)<span style="font: 7.0pt 'Times New Roman';">       </span></span></span><!--[endif]--><span lang="EN-GB">solid wood;</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">b)<span style="font: 7.0pt 'Times New Roman';">       </span></span></span><!--[endif]--><span lang="EN-GB">material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2);</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">c)<span style="font: 7.0pt 'Times New Roman';">        </span></span></span><!--[endif]--><span lang="EN-GB">gypsum boards, gypsum bounded fibreboards;</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">d)<span style="font: 7.0pt 'Times New Roman';">       </span></span></span><!--[endif]--><span lang="EN-GB">composite materials with core consisting of, e.g. polyurethane or mineral material;</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">e)<span style="font: 7.0pt 'Times New Roman';">       </span></span></span><!--[endif]--><span lang="EN-GB">composite boards made from the materials listed above;</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">f)<span style="font: 7.0pt 'Times New Roman';">         </span></span></span><!--[endif]--><span lang="EN-GB">all materials listed above, already lacquered.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document does not deal with hazards related to:</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">specific devices other than those listed above;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">access through in-feed and out-feed openings of machines with a work piece height capacity greater than 700 mm;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">systems for powered loading or unloading, or both, of the workpiece to or from a single machine;</span></p> <p class="Noteindent"><span lang="EN-GB">NOTE 2<span style="mso-tab-count: 1;">        </span>Loading the machine manually includes manually placing the workpiece onto a conveyor directly controlled by the machine. Unloading the machine manually includes manually removing the workpiece from a conveyor directly controlled by the machine.</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">out-feed workpieces on machines with feed speed higher than 60 m/min;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">interfacing of the machine with any other machine.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document is not applicable to machines intended for use in a potentially explosive atmosphere and to machines manufactured prior to the date of its publication.</span></p>
Reģistrācijas numurs (WIID)82338
Darbības sfēra<p class="MsoBodyText"><span lang="EN-GB">This document specifies the safety requirements and measures for wide belt sanding machines (defined in 3.1) and for surface treating machines (defined in 3.2) capable of continuous production use, altogether referred to as “machines”.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases are also taken into account.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">transversal sanding unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">cleaning brushing unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">satining roller unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">disk brushing unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">texturing brushing roller unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">texturing brushing belt unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">cutterblock unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">texturing band saw unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">spiked roller unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">multi blade unit;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">conveyor directly controlled by the machine;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">additional workpiece vacuum clamping device;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">antistatic bar unit.</span></p> <p class="Note"><span lang="EN-GB">NOTE 1<span style="mso-tab-count: 1;">        </span>An antistatic bar is a device that eliminates electrostatic charges on the workpiece to ease its subsequent cleaning from dust by airflow.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document is also applicable to machines fitted with a laser engraving unit, but the specific hazards of this unit have not been dealt with.</span></p> <p class="MsoBodyText"><span lang="EN-GB">The machines are designed to process workpieces with flat surface and even thickness, in shape of panels or beams or frames, consisting of:</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">a)<span style="font: 7.0pt 'Times New Roman';">       </span></span></span><!--[endif]--><span lang="EN-GB">solid wood;</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">b)<span style="font: 7.0pt 'Times New Roman';">       </span></span></span><!--[endif]--><span lang="EN-GB">material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2);</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">c)<span style="font: 7.0pt 'Times New Roman';">        </span></span></span><!--[endif]--><span lang="EN-GB">gypsum boards, gypsum bounded fibreboards;</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">d)<span style="font: 7.0pt 'Times New Roman';">       </span></span></span><!--[endif]--><span lang="EN-GB">composite materials with core consisting of, e.g. polyurethane or mineral material;</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">e)<span style="font: 7.0pt 'Times New Roman';">       </span></span></span><!--[endif]--><span lang="EN-GB">composite boards made from the materials listed above;</span></p> <p class="ListNumber1" style="mso-list: l0 level1 lfo2;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">f)<span style="font: 7.0pt 'Times New Roman';">         </span></span></span><!--[endif]--><span lang="EN-GB">all materials listed above, already lacquered.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document does not deal with hazards related to:</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">specific devices other than those listed above;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">access through in-feed and out-feed openings of machines with a work piece height capacity greater than 700 mm;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">systems for powered loading or unloading, or both, of the workpiece to or from a single machine;</span></p> <p class="Noteindent"><span lang="EN-GB">NOTE 2<span style="mso-tab-count: 1;">        </span>Loading the machine manually includes manually placing the workpiece onto a conveyor directly controlled by the machine. Unloading the machine manually includes manually removing the workpiece from a conveyor directly controlled by the machine.</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">out-feed workpieces on machines with feed speed higher than 60 m/min;</span></p> <p class="ListContinue1" style="mso-list: l1 level1 lfo1;"><!-- [if !supportLists]--><span lang="EN-GB" style="mso-fareast-font-family: Cambria; mso-bidi-font-family: Cambria;"><span style="mso-list: Ignore;">—<span style="font: 7.0pt 'Times New Roman';">     </span></span></span><!--[endif]--><span lang="EN-GB">interfacing of the machine with any other machine.</span></p> <p class="MsoBodyText"><span lang="EN-GB">This document is not applicable to machines intended for use in a potentially explosive atmosphere and to machines manufactured prior to the date of its publication.</span></p>
StatussStandarts spēkā
ICS grupa13.110
79.120.10