ISO/TC 58/SC 3
| Projekta Nr. | ISO 11119-3:2013 |
|---|---|
| Nosaukums | <p>ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.</p> <p>The cylinders and tubes in ISO 11119-3:2013 are</p> <ul> <li>Type 4 Fully Wrapped Cylinders or Tubes with a non-load sharing liner and composite reinforcement on both the cylindrical portion and the dome ends, and</li> <li>Type 5 Fully Wrapped Cylinders or Tubes without liners (including cylinders without liners manufactured from two parts joined together) and with a test pressure of less than 60 bar.</li> </ul> <p>The cylinders are constructed</p> <ul> <li>in the form of a disposable mandrel overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a resin matrix to provide longitudinal and circumferential reinforcement, and</li> <li>in the form of two filament wound shells joined together.</li> </ul> <p>Cylinders and tubes manufactured and tested to ISO 11119-3:2013 are not intended to contain toxic, oxidizing or corrosive gases.</p> <p>ISO 11119-3:2013 is limited to cylinders and tubes with composite reinforcement of carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix.</p> <p>Cylinders and tubes manufactured and tested to ISO 11119-3:2013 have a minimum design life of 15 years.</p> <p>ISO 11119-3:2013 does not address the design, fitting and performance of removable protective sleeves.</p> |
| Reģistrācijas numurs (WIID) | 50523 |
| Darbības sfēra | <p>ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.</p> <p>The cylinders and tubes in ISO 11119-3:2013 are</p> <ul> <li>Type 4 Fully Wrapped Cylinders or Tubes with a non-load sharing liner and composite reinforcement on both the cylindrical portion and the dome ends, and</li> <li>Type 5 Fully Wrapped Cylinders or Tubes without liners (including cylinders without liners manufactured from two parts joined together) and with a test pressure of less than 60 bar.</li> </ul> <p>The cylinders are constructed</p> <ul> <li>in the form of a disposable mandrel overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a resin matrix to provide longitudinal and circumferential reinforcement, and</li> <li>in the form of two filament wound shells joined together.</li> </ul> <p>Cylinders and tubes manufactured and tested to ISO 11119-3:2013 are not intended to contain toxic, oxidizing or corrosive gases.</p> <p>ISO 11119-3:2013 is limited to cylinders and tubes with composite reinforcement of carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix.</p> <p>Cylinders and tubes manufactured and tested to ISO 11119-3:2013 have a minimum design life of 15 years.</p> <p>ISO 11119-3:2013 does not address the design, fitting and performance of removable protective sleeves.</p> |
| Statuss | Atcelts |
| ICS grupa | 23.020.30 23.020.35 |