Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
<p>ISO 10414-2:2011 provides standard procedures for determining the following characteristics of oil-based drilling fluids:</p>
<ul>
<li> drilling fluid density (mud weight);</li>
<li> viscosity and gel strength;</li>
<li> filtration;</li>
<li> oil, water and solids concentrations;</li>
<li> alkalinity, chloride concentration and calcium concentration;</li>
<li> electrical stability;</li>
<li> lime and calcium concentrations, calcium chloride and sodium chloride concentrations;</li>
<li> low-gravity solids and weighting material concentrations.</li>
</ul>
<p>The annexes provide additional test methods or examples that can optionally be used for the determination of:</p>
<ul>
<li> shear strength</li>
<li> oil and water concentrations from cuttings;</li>
<li> drilling fluid activity;</li>
<li> aniline point;</li>
<li> lime, salinity and solids concentration;</li>
<li> sampling, inspection and rejection;</li>
<li> rig-site sampling;</li>
<li> cuttings activity;</li>
<li> active sulphides;</li>
<li> calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances;</li>
<li> permeability plugging apparatus with set-screw secured end cap;</li>
<li> permeability plugging apparatus with threaded end cap;</li>
<li> elastomer compatibility;</li>
<li> sand content of oil-based fluid;</li>
<li> identification and monitoring of weight-material sag;</li>
<li> oil-based drilling fluid test report form.</li>
</ul>
Reģistrācijas numurs (WIID)
41192
Darbības sfēra
<p>ISO 10414-2:2011 provides standard procedures for determining the following characteristics of oil-based drilling fluids:</p>
<ul>
<li> drilling fluid density (mud weight);</li>
<li> viscosity and gel strength;</li>
<li> filtration;</li>
<li> oil, water and solids concentrations;</li>
<li> alkalinity, chloride concentration and calcium concentration;</li>
<li> electrical stability;</li>
<li> lime and calcium concentrations, calcium chloride and sodium chloride concentrations;</li>
<li> low-gravity solids and weighting material concentrations.</li>
</ul>
<p>The annexes provide additional test methods or examples that can optionally be used for the determination of:</p>
<ul>
<li> shear strength</li>
<li> oil and water concentrations from cuttings;</li>
<li> drilling fluid activity;</li>
<li> aniline point;</li>
<li> lime, salinity and solids concentration;</li>
<li> sampling, inspection and rejection;</li>
<li> rig-site sampling;</li>
<li> cuttings activity;</li>
<li> active sulphides;</li>
<li> calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances;</li>
<li> permeability plugging apparatus with set-screw secured end cap;</li>
<li> permeability plugging apparatus with threaded end cap;</li>
<li> elastomer compatibility;</li>
<li> sand content of oil-based fluid;</li>
<li> identification and monitoring of weight-material sag;</li>
<li> oil-based drilling fluid test report form.</li>
</ul>
