Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This standard shall be used as the basis for testing electrically powered air circulating fan heads and ceiling fans when air is used as the test gas. The scope is limited to air circulating fans with an input power greater than or equal to 125 W—except for ceiling fans that are larger than 1800 mm, which do not have a lower input power limit. The diameter of the fan being tested shall be limited by the minimum dimensions as shown in the applicable test figures.
Exclusions:
• Jet fans
• Powered roof ventilators, induced flow fans, laboratory exhausts
• Positive pressure ventilators as defined in ANSI/AMCA Standard 240
• Compressors
• Positive displacement machines
Only tests that fulfil all mandatory requirements of this standard may be designated as tests conducted in accordance with this standard.
Reģistrācijas numurs (WIID)
86894
Darbības sfēra
This standard shall be used as the basis for testing electrically powered air circulating fan heads and ceiling fans when air is used as the test gas. The scope is limited to air circulating fans with an input power greater than or equal to 125 W—except for ceiling fans that are larger than 1800 mm, which do not have a lower input power limit. The diameter of the fan being tested shall be limited by the minimum dimensions as shown in the applicable test figures.
Exclusions:
• Jet fans
• Powered roof ventilators, induced flow fans, laboratory exhausts
• Positive pressure ventilators as defined in ANSI/AMCA Standard 240
• Compressors
• Positive displacement machines
Only tests that fulfil all mandatory requirements of this standard may be designated as tests conducted in accordance with this standard.
