Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
<p>ISO 5393:2017 specifies a laboratory performance test method for power assembly tools (referred throughout the document as "tool") for installing threaded fasteners.</p>
<p>ISO 5393:2017 provides a method for the measurement of torque repeatability (scatter)</p>
<p>- over a range of torque rates as specified in this document,</p>
<p>- over a range of torque adjustment as defined by the manufacturer, and</p>
<p>- over a number of operating cycles as defined by the manufacturer.</p>
<p>ISO 5393:2017 provides a method for the measurement of the precision of the built-in torque measurement system for tools incorporating such a feature. See Annex E.</p>
<p>ISO 5393:2017 gives instructions on equipment parameters, what to test for and how to evaluate and present the test data.</p>
<p>ISO 5393:2017 is applicable to tools</p>
<p>- of any power source, e.g. pneumatic, hydraulic, and electric, including battery-powered,</p>
<p>- which apply torque in a generally continuous manner, and</p>
<p>- within the torque range 0,5 Nm to 2 000 Nm. Outside this range, it is acceptable to modify the test method providing that the modification is documented in the test report.</p>
<p>ISO 5393:2017 is not applicable to</p>
<p>- impact or impulse wrenches,</p>
<p>- ratchet wrenches or wrenches with ratcheting clutches, and</p>
<p>- other tools which advance fasteners in discontinuous increments, overcoming static friction at each increment.</p>
<p>ISO 5393:2017 allows a test to be performed at any test torque level; however, in order to minimize the number of test joints necessary for a wide range of test torque levels, a list of preferred test torque levels is provided in Annex A.</p>
Reģistrācijas numurs (WIID)
63133
Darbības sfēra
<p>ISO 5393:2017 specifies a laboratory performance test method for power assembly tools (referred throughout the document as "tool") for installing threaded fasteners.</p>
<p>ISO 5393:2017 provides a method for the measurement of torque repeatability (scatter)</p>
<p>- over a range of torque rates as specified in this document,</p>
<p>- over a range of torque adjustment as defined by the manufacturer, and</p>
<p>- over a number of operating cycles as defined by the manufacturer.</p>
<p>ISO 5393:2017 provides a method for the measurement of the precision of the built-in torque measurement system for tools incorporating such a feature. See Annex E.</p>
<p>ISO 5393:2017 gives instructions on equipment parameters, what to test for and how to evaluate and present the test data.</p>
<p>ISO 5393:2017 is applicable to tools</p>
<p>- of any power source, e.g. pneumatic, hydraulic, and electric, including battery-powered,</p>
<p>- which apply torque in a generally continuous manner, and</p>
<p>- within the torque range 0,5 Nm to 2 000 Nm. Outside this range, it is acceptable to modify the test method providing that the modification is documented in the test report.</p>
<p>ISO 5393:2017 is not applicable to</p>
<p>- impact or impulse wrenches,</p>
<p>- ratchet wrenches or wrenches with ratcheting clutches, and</p>
<p>- other tools which advance fasteners in discontinuous increments, overcoming static friction at each increment.</p>
<p>ISO 5393:2017 allows a test to be performed at any test torque level; however, in order to minimize the number of test joints necessary for a wide range of test torque levels, a list of preferred test torque levels is provided in Annex A.</p>
