Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
<p>ISO 28278-2:2010 gives guidelines for the assembly and bonding of glass elements in a frame, window, door or curtain-walling construction, or directly into the building by means of structural bonding of the glass element into or onto the framework or directly into the building. </p>
<p>It gives the assembler information that enables him to organize his work and comply with requirements regarding quality control.</p>
<p>Quality control of the assembly process is of the highest importance. ISO 28278-2:2010 provides the minimum requirements for acceptable quality control of the process of structural sealant glazing (SSG) on a single project. The annexes contained at the end of ISO 28278-2:2010 provide the methods to ensure proper application and documentation for a safe and weatherproof glazing assembly product.</p>
<p>This process is intended to be applicable to most SSG projects. The project testing on metal substrates and glass products will determine proper surface preparation and installation instructions.</p>
<p>These rules do not apply to the adhesion or durability of the paint finishes or glass products. This is not intended to be a durability test requirement for the paint and glass products commonly used in the SSG process.</p>
<p>The structural, weatherproofing and sealant products which are commonly used in structural glazing applications are those based on organosiloxane, "silicone" polymers.</p>
<p>ISO 28278-2:2010 does not preclude the use of other sealant types, where these can demonstrate suitability for service according to ISO 28278-2:2010 and when they are used following the recommendations of the sealant manufacturer.</p>
Reģistrācijas numurs (WIID)
44600
Darbības sfēra
<p>ISO 28278-2:2010 gives guidelines for the assembly and bonding of glass elements in a frame, window, door or curtain-walling construction, or directly into the building by means of structural bonding of the glass element into or onto the framework or directly into the building. </p>
<p>It gives the assembler information that enables him to organize his work and comply with requirements regarding quality control.</p>
<p>Quality control of the assembly process is of the highest importance. ISO 28278-2:2010 provides the minimum requirements for acceptable quality control of the process of structural sealant glazing (SSG) on a single project. The annexes contained at the end of ISO 28278-2:2010 provide the methods to ensure proper application and documentation for a safe and weatherproof glazing assembly product.</p>
<p>This process is intended to be applicable to most SSG projects. The project testing on metal substrates and glass products will determine proper surface preparation and installation instructions.</p>
<p>These rules do not apply to the adhesion or durability of the paint finishes or glass products. This is not intended to be a durability test requirement for the paint and glass products commonly used in the SSG process.</p>
<p>The structural, weatherproofing and sealant products which are commonly used in structural glazing applications are those based on organosiloxane, "silicone" polymers.</p>
<p>ISO 28278-2:2010 does not preclude the use of other sealant types, where these can demonstrate suitability for service according to ISO 28278-2:2010 and when they are used following the recommendations of the sealant manufacturer.</p>
