Informējam, ka Sistēma pielāgota darbam ar interneta pārlūkprogrammu Internet Explorer (8. un jaunākām versijām) un Mozilla Firefox (3.6 un jaunākām versijām).
Izmantojot citu interneta pārlūkprogrammu, brīdinām, ka Sistēmas funkcionalitāte var tikt traucēta.
This standard specifies field procedures to be adopted when evaluating the uncertainty in the centring of topographic and geodetic instruments, and their ancillary equipment, in any type of surveying measurement, including building and industrial measurements. These instruments include all those that have a plumb system (plumb bob, centring rod, optical or laser plummet) to set up on the desired ground point materialized by a survey mark, including theodolites, total stations or GNSS receivers. In the case of GNSS receivers, the procedures are applicable as long as the plumb is located on the tribrach and is interchangeable, so that a theodolite or total station can be mounted on it.
The tests performed are primarily intended to be used as field verification of the suitability of a particular instrument for the specific and immediate task and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations, which are more comprehensive in nature.
These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment.
Reģistrācijas numurs (WIID)
91502
Darbības sfēra
This standard specifies field procedures to be adopted when evaluating the uncertainty in the centring of topographic and geodetic instruments, and their ancillary equipment, in any type of surveying measurement, including building and industrial measurements. These instruments include all those that have a plumb system (plumb bob, centring rod, optical or laser plummet) to set up on the desired ground point materialized by a survey mark, including theodolites, total stations or GNSS receivers. In the case of GNSS receivers, the procedures are applicable as long as the plumb is located on the tribrach and is interchangeable, so that a theodolite or total station can be mounted on it.
The tests performed are primarily intended to be used as field verification of the suitability of a particular instrument for the specific and immediate task and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations, which are more comprehensive in nature.
These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment.
